20 oz Skinny Tumbler Wrap Size and Template
Starts on the 9.30 × 8.20 in straight standard. Flip to the tapered body, add overlap, and the template, the cup and the pixel sizes follow.
- cut
- bleed
- seam overlap
- safe zone
- handle edge
- sheet join
Front view · design centreDrag to rotate · seam overlap in cyan
Export this wrap
Free files no sign-up · no watermark
Production pack Early Launch Price · Save 50%
Press-ready files for this exact blank: mirrored-bleed 300 DPI PNG with seam ticks, cut-mask SVG and full-bleed PDF, plus the 6-size Etsy bundle and gang sheets.
$6.99$14.007-day pass, no renewal
- Outer arc
- 9.30 in 236.2 mm
- Inner arc
- 9.30 in 236.2 mm
- Sector angle
- 0.00° flat
- Flat bounding box
- 9.30 × 8.20 in 236.2 × 208.3 mm2790 × 2460 px @ 300 DPI
- Paper fit
- Fits Letter (landscape)
- Shape
- Straight rectangle |D1 − D2| < 0.05 mm
- Print size with bleed
- 9.30 × 8.20 in incl. 0.00 in bleed
- Slant height
- 8.20 in vertical 8.20 in
- Handle gap
- None full wrap
Tapered wrap dimensions are calculated from exact conical frustum geometry. Because blank tumblers vary by manufacturer batch, always print the free 1:1 paper test-fit strip and verify the 1-inch / 10-mm ruler before pressing sublimation transfers.
Production dock · live preview of the paid packs
Free gives you the exact template. A pass adds production files built from your current blank.
| Blank | Cut size | 300 DPI file |
|---|---|---|
| 20oz Skinny Straight | 9.30 × 8.20 in | 2837 × 2507 px |
| 20oz Skinny Tapered | 9.18 × 8.22 in | 2802 × 2514 px |
| 30oz Modern Curve Taper | 12.50 × 9.68 in | 3796 × 2950 px |
| 40oz Quencher Upper + Lower | 10.75 × 5.26 in + 11.63 × 4.91 in | 3271 × 1627 + 3536 × 1520 px |
| 16oz Libbey Glass Can | 9.39 × 5.12 in | 2866 × 1583 px |
| 15oz Classic Mug | 8.62 × 4.00 in | 2634 × 1247 px |
Free: everything above the dock. Paid: the three packs here, built on the server from your current settings and never stored.
20 oz skinny tumbler wrap size in inches, mm and pixels
The 20 oz skinny is the most-sold sublimation blank, and it comes in two bodies that look identical on a product photo. The straight body takes a plain rectangle. The tapered body narrows by a few millimetres toward the base and needs a curved sector, even though the curve is gentle. Both are computed below from the same engine as the workbench.
| Blank | Cut size (in) | Cut size (mm) | Angle | 300 DPI | Letter |
|---|---|---|---|---|---|
| 20oz Skinny Straight | 9.30 × 8.20 in | 236.2 × 208.3 mm | 0.00° | 2790 × 2460 px | Fits Letter (landscape) |
| Straight + 0.25 in overlap | 9.40 × 8.20 in | 238.8 × 208.3 mm | 0.00° | 2821 × 2460 px | Fits Letter (landscape) |
| 20oz Skinny Tapered | 9.18 × 8.22 in | 233.2 × 208.9 mm | 6.22° | 2755 × 2467 px | Tiles to 2 Letter sheets (with 2 mm bleed) |
| 22oz Skinny Tapered | 9.55 × 9.00 in | 242.7 × 228.6 mm | 5.26° | 2866 × 2699 px | Tiles to 2 Letter sheets (with 2 mm bleed) |
The 22 oz skinny sits in the table for comparison because buyers often confuse the two. It is about 0.77 in taller and slightly wider, so a 20 oz design stretched onto it loses its proportions. If a customer is unsure, ask for the height of the printable wall, not the ounces.
Why the straight standard is 9.3 by 8.2 inches
A straight 20 oz skinny wall is close to 74 mm across. Wrapped once, that is 9.15 in of paper, and a small overlap of 3.7 mm brings the width to 9.30 in so the seam never opens. The 8.2 in height is the printable band between the lid ring and the rounded base, about 208 mm on most bodies.
Those numbers are a starting point, not a law. Blanks from different factories differ by a millimetre or two in diameter, and each extra millimetre adds 3.1 mm of circumference. That is why the preset carries the formula rather than a fixed picture: change the diameter and the width follows exactly, while the height and overlap stay where you set them.
Pixels, DPI and how big to make your canvas
Sublimation printers expect 300 dots per inch at the size you press. The readout converts the cut bounding box to pixels with that rule, rounding to the nearest pixel, and the free warped PNG carries a 300 DPI tag (pHYs 11811 pixels per metre) so print dialogs place it at the right size without manual scaling.
| What you are making | Canvas | Why |
|---|---|---|
| Straight 20 oz, no bleed | 2790 × 2460 px | Exact 9.30 × 8.20 in print |
| Straight 20 oz, 0.25 in overlap | 2821 × 2460 px | Hides the seam under the overlap |
| Tapered 20 oz design rectangle | 2755 × 2467 px | Warp it to the sector afterwards |
| Tapered 20 oz with 2 mm bleed | 2802 × 2514 px | Production file size in the paid pack |
Making a 20 oz skinny wrap that closes cleanly
Choose straight or tapered
Measure rim and base. Under 1 mm apart, keep Straight; otherwise tap Tapered and the sector replaces the rectangle.
Set the overlap
Use 0.25 in for most straight skinnies; the cyan band shows where the end of the print lands.
Test on paper
Print the test-fit PDF at 100 %, check the rulers, wrap it and tape the seam before you waste sublimation paper.
Export the file
Download the SVG for Canva or Cricut, or warp your art into a 300 DPI PNG for the tapered body.
Use cases
- Listing digital wraps
Sell the straight 9.3 × 8.2 in file and include the tapered version so buyers with either body can print. The tumbler wrap size chart shows the other popular sizes in one table.
- A buyer who is not sure
Send them the guide on how to measure a tapered tumbler; a soft tape at the rim and base settles straight versus tapered in a minute.
- Moving up to bigger cups
When orders shift to handle cups, the 40 oz tumbler wrap template handles the upper band and the lower taper, and the main tapered tumbler wrap template generator takes any custom blank.
- Curving a finished design
Already have a flat 20 oz design? Warp the rectangular image to the tapered tumbler and download a curved 300 DPI PNG for the tapered body, or check mugs on the latte mug calculator.
Questions makers ask
What is the standard 20 oz skinny tumbler wrap size?
For a straight 20 oz skinny the common print size is 9.3 × 8.2 in, which is 2790 × 2460 px at 300 DPI. That equals a 74 mm wall diameter wrapped once plus 3.7 mm of seam overlap, by 208.3 mm of printable height. Measure your batch, because some blanks run a millimetre wider.
How do I tell a straight 20 oz skinny from a tapered one?
Measure around the rim and around the base with a soft tape. If the two circumferences differ by less than about 1 mm the blank is straight and a rectangle works. A tapered 20 oz usually measures about 9.03 in at the top and 8.16 in at the bottom, and needs the curved template instead.
Does the 9.3 × 8.2 in wrap print on Letter paper?
Yes, in landscape. Letter is 11 × 8.5 in, and after a 3 mm printer margin on each edge the printable height is about 8.26 in, just enough for 8.2 in. Adding 2 mm of bleed pushes it to 8.36 in, which no longer fits, so the straight preset defaults to no bleed.
How much overlap stops the white line at the seam?
A quarter inch is the usual answer for straight 20 oz skinnies. Set the overlap to 0.25 in and the template widens from 9.30 to 9.40 in, about 2821 px at 300 DPI. Tape the overlapping end on top so any colour shift sits under the tape, not in the middle of the design.
Which pixel size should I use in Canva or Procreate?
Create the canvas at the 300 DPI pixel size in the readout: 2790 × 2460 px for the straight standard. For a tapered 20 oz, design on a rectangle of about 2755 × 2467 px, then warp it with the image warp tool so the top edge lands on the wide rim of the sector.
Other wrap tools on the same engine
Guides